The spinneret ultrasonic cleaning machine can instantly produce more bubbles in the workpiece accessories. First, the pressure principle is applied to break and clean the bubbles. Therefore, the spinneret cleaning method is the cleaning method with the lowest damage rate to the workpiece at present

，在精細工業中具有良好的效果。在日常生活中，如玻璃清洗、精密儀器、工件清洗等，都需要這樣的設備。你知道它的缺點嗎?噴絲板超聲波清洗機介紹了其四大缺點:一是清洗依從性強。多功率超聲振蕩器之所以被廣泛應用于許多行業，是因為它具有很強的清洗依從性，不僅是多功率率用于清洗各種不同的工件。同時，板的尺寸和任務的頻率也有良好的符合性，使設備能夠在各種環境條件下繼續工作。

First, it has good results in fine industry. Such equipment is needed in daily life, such as glass cleaning, precision instruments, workpiece cleaning, etc. Do you know its disadvantages? Spinneret ultrasonic cleaning machine introduces its four disadvantages: first, strong cleaning compliance. The reason why multi power ultrasonic oscillator is widely used in many industries is that it has strong cleaning compliance, not only multi power rate is used to clean various workpieces. At the same time, the size of the board and the frequency of the task also have good compliance, so that the equipment can continue to work under various environmental conditions.

第二空化力較強。少數超聲波清洗產品以空化為技術中心，通過聲壓振動調節壓力能量。多功率超聲振蕩器可根據實際情況，停止多功率調節，在保證空化力的前提下，瞬間氣泡，達到快速清洗的目的。

Second, the cavitation force is strong. A few ultrasonic cleaning products take cavitation as the technical center and adjust the pressure energy through sound pressure vibration. The multi power ultrasonic oscillator can stop multi power regulation according to the actual situation, and instantly eliminate bubbles on the premise of ensuring the cavitation force, so as to achieve the purpose of rapid and efficient cleaning.

第三類產品殘留率小，用于高精度清潔產品，但很多產品深度清潔效果不佳。具有良好的多功率和質量的超聲振蕩器可以突破這一瓶頸。經精細調理后，可將氣泡提升大間隙，并可停止徹底清洗。純化后的物質在快速剝落后不易附著在工件上，所以純化后的物質殘留率較低。

The third kind of products have low residue rate and are used for high-precision cleaning products, but the deep cleaning effect of many products is poor. The ultrasonic oscillator with good multi power and quality can break through this bottleneck. After fine conditioning, the bubble can be lifted to a large gap and thorough cleaning can be stopped. The purified material is not easy to adhere to the workpiece after rapid peeling, so the residue rate of the purified material is low.

第四超聲波振蕩器具有良好的泡沫密度和高性價比的崎嶇不平的操作可以確保設備,和振蕩器可以形成一個密集的國際米蘭階段顯示形式的泡沫,可用于精確有序停止清洗,然后通過高壓氣泡迅速打破,和幾個大氣壓力發生實現清潔的目的。因此，超聲振蕩器的氣泡密度高，清洗波動好。

Fourth the ultrasonic oscillator has a good foam density and cost-effective rugged operation to ensure that the device and oscillator can form a dense international Milan stage display form of foam, which can be used for precise and orderly stop cleaning, and then quickly break through high pressure bubbles, and achieve high efficiency and cleanliness with several atmospheric pressures. Therefore, the ultrasonic oscillator has high bubble density and good cleaning fluctuation.

如發現振蕩器外部重要部件有污垢，應及時清理，特別是重要任務部件，應加以保護和愛護。嚴禁出現液體腐蝕現場。另外，清洗罐也要定期清洗。清洗后，應使用的吸力工具來吸收表面的水分。浸沒式超聲振蕩器不僅可用于工業機械的除油除銹、紡織工業的噴絲板清洗等，而且在石油化工、半導體等行業也有推廣作用。鑒于目前的情況，這種振蕩器在涵蓋了大量的行業，作為許多行業不可缺少的輔助清潔設備，我們在日常生活中應該停止對它的迷信。那么如何保養浸泡式超聲振蕩器呢?以下是噴絲板超聲波清洗機的介紹:

If dirt is found on the external important parts of the oscillator, it shall be cleaned in time, especially the important task parts, which shall be protected and cherished. Liquid corrosion is strictly prohibited. In addition, the cleaning tank should also be cleaned regularly. After cleaning, professional suction tools shall be used to absorb the water on the surface. Immersion ultrasonic oscillator can be used not only for oil and rust removal of industrial machinery and spinneret cleaning of textile industry, but also in petrochemical, semiconductor and other industries. In view of the current situation, this oscillator covers a large number of industries in China. As an indispensable auxiliary cleaning equipment in many industries, we should stop superstitious about it in our daily life. So how to maintain the immersion ultrasonic oscillator? The following is the introduction of spinneret ultrasonic cleaning machine:

一是清洗側面排氣浸泡式超聲振蕩器的底部和側面排氣口，以保證設備的散熱和率的波動任務。排氣口的流暢性與設備任務的波動有間接的關系，所以需要定期清洗側邊排氣口，排出固體凈化物質，以免堵塞氣流通道。一般來說，這種清洗的頻率與使用周期有一定的關系。當使用頻繁時，需要每7 ~ 60天清洗一次。

First, clean the bottom and side exhaust ports of the side exhaust immersion ultrasonic oscillator to ensure the heat dissipation and high-efficiency fluctuation task of the equipment. The smoothness of the exhaust port is indirectly related to the fluctuation of equipment tasks, so it is necessary to regularly clean the side exhaust port to discharge solid purification substances to avoid blocking the air flow channel. Generally speaking, the frequency of this cleaning has a certain relationship with the service cycle. When used frequently, it needs to be cleaned every 7 ~ 60 days.

在第二次過熱中，許多操作人員在使用評價較高的超聲振蕩器時，并沒有注意設備的散熱，這是造成設備損壞的重要因素。雖然有少量的超聲波振蕩器有過熱的維護和安裝，但當功率輸入高時，維護和安裝可能會出現故障，在溫度臨界點報警安裝可能會延遲。所以如果你發現機身表面過熱，你必須立即停止任務，并在溫度分布后重新啟動機器。如果有必要，你可以添加物理冷卻方法來快速冷卻。

In the second overheating, many operators did not pay attention to the heat dissipation of the equipment when using the ultrasonic oscillator with high evaluation, which is the most important factor causing equipment damage. Although a small number of ultrasonic oscillators have overheated maintenance and installation, when the power input is high, the maintenance and installation may fail, and the installation may be delayed at the temperature critical point. So if you find that the surface of the fuselage is overheated, you must stop the task immediately and restart the machine after the temperature distribution. If necessary, you can add physical cooling methods to cool quickly.

第三種清洗劑用于清洗普通的性價比高的超聲波振蕩器。清洗劑在室外停留時間長，易揮發的氣體與必要部位頻繁接觸，形成腐蝕或損壞。因此，使用超聲振蕩器一次后，注意將洗滌劑倒空，必要時用清水清洗干凈。

The third cleaning agent is used to clean ordinary cost-effective ultrasonic oscillators. The cleaning agent stays outdoors for a long time, and the volatile gas frequently contacts with the necessary parts to form corrosion or damage. Therefore, after using the ultrasonic oscillator once, pay attention to empty the detergent and clean it with clean water if necessary.

第四臨時放置應使用防銹劑超聲波振蕩器雖然在某些行業是必要的設備，但其應用頻率不高，如果臨時放置一定要注意防銹劑的使用。由于超聲波清洗產品不應生銹或受潮，外部腐蝕會嚴重影響設備任務的波動、儲存和任務，內部腐蝕會嚴重影響設備的外觀。

Fourth, antirust agent should be used for temporary placement. Although ultrasonic oscillator is a necessary equipment in some industries, its application frequency is not high. If it is placed temporarily, we must pay attention to the use of antirust agent. Since ultrasonic cleaning products should not rust or be affected with moisture, external corrosion will seriously affect the fluctuation, storage and sterilization of equipment tasks, and internal corrosion will seriously affect the appearance of equipment.

以上是噴絲板超聲振蕩器的日常保養及保養方法。噴絲板超聲波設備有限公司是一家從事超聲波清洗機研發、消費、銷售的超聲波清洗機制造商。公司擁有一批從事超聲清洗設備行業多年的工程技術人員。目前二次使用的超聲波清洗機有單罐超聲波清洗機、多罐超聲波清洗機、半自動超聲波清洗機、全自動超聲波清洗機以及清洗輸送干燥和破碎的超聲波清洗機、熱風循環烘箱設備等。

The above are the daily maintenance and maintenance methods of spinneret ultrasonic oscillator. Spinneret ultrasonic equipment Co., Ltd. is a manufacturer of ultrasonic cleaning mechanism specializing in the R & D, consumption and sales of ultrasonic cleaning machine. The company has a group of engineering and technical personnel engaged in ultrasonic cleaning equipment industry for many years. At present, the secondary ultrasonic cleaning machines include single tank ultrasonic cleaning machine, multi tank ultrasonic cleaning machine, semi-automatic ultrasonic cleaning machine, full-automatic ultrasonic cleaning machine, ultrasonic cleaning machine for cleaning, conveying, drying and crushing, hot air circulation oven equipment, etc.

工業超聲振蕩器是一種常用的工業超聲清洗設備。根據不同行業的需要，可以選擇不同的型號。在許多電鍍廠、五金工具廠和除塵行業，這種超聲波振動設備用于停止振動清洗任務，并根據不同的工件需要選擇不同的超聲波頻率和箱體容積的商品。它比一般的振蕩裝置要好。這種工業超聲波振蕩器有什么特點?

Industrial ultrasonic oscillator is a common industrial ultrasonic cleaning equipment. Different models can be selected according to the needs of different industries. In many electroplating factories, hardware tool factories and dust removal industries, this ultrasonic vibration equipment is used to stop vibration cleaning tasks, and select commodities with different ultrasonic frequency and box volume according to the needs of different workpieces. It is better than ordinary oscillation devices. What are the characteristics of this industrial ultrasonic oscillator?

罐為不銹鋼材質，使用壽命長。由于外力對工業超聲波振子的影響很小，所以按規定操作不會造成損傷。工業振蕩器的外箱采用不銹鋼結構，焊接工藝為前兩名之一，不易磨損或出缸，使用壽命長。

The first tank is made of stainless steel with long service life. Since the external force has little influence on the industrial ultrasonic vibrator, the operation according to the regulations will not cause damage. The outer box of the industrial oscillator adopts stainless steel structure, and the welding process is one of the top two, which is not easy to wear or out of the cylinder and has a long service life.

二次清洗潔凈度高，的超聲波振蕩器，可停止清洗各種材質的工件。清洗能力強。一鍵即可停止清洗表面的附件。因此，該振蕩器既能滿足高規格清洗的要求，又能適應大批量清洗的情況。自動控溫、脫水、風干等，既浪費人力又節省費用。

Secondary cleaning has high cleanliness. Professional ultrasonic oscillator can stop cleaning workpieces of various materials. Strong cleaning ability. One click to stop cleaning accessories on the surface. Therefore, the oscillator can not only meet the requirements of high-specification cleaning, but also adapt to the situation of mass cleaning. Automatic temperature control, dehydration, air drying, etc., which not only wastes manpower but also saves costs.

工業超聲振蕩器的第三個功能波動好，能量轉化率高，可以長時間連續工作。由于其良好的功能波動，長期使用不會降低清洗效率和清洗效果。由于其加熱功能，它也可以很容易地油和蠟的污染。

The third function of industrial ultrasonic oscillator has good fluctuation, high energy conversion rate and can work continuously for a long time. Due to its good function fluctuation, long-term use will not reduce the cleaning efficiency and cleaning effect. Due to its heating function, it can also easily remove the pollution of oil and wax.

由于工業超聲振子體積大，在清洗過程中產生的廢水多，功率大，產生的電流和熱量多，所以高品質超聲振子的散熱更加。內置國際的散熱器配件，有效排水，同時有效阻止散熱，積極提高使用壽命。

Due to the large volume of industrial ultrasonic vibrator, more waste water, high power and more current and heat generated in the cleaning process, the heat dissipation of high-quality ultrasonic vibrator is more perfect. Built in international advanced radiator accessories can effectively drain water, effectively prevent heat dissipation and actively improve service life.